Introduction
The wall vibrator is also known as an anti-clutch device, the warehouse wall vibrator, is used to prevent and exclude various silos due to the internal friction, tide, charge, and ingredients of materials. "Blocking", "Tag Arch" phenomenon caused by segregation, and the wall vibrator, also known as the anti-clutch device, the warehouse wall vibrator can also be used to remove various warehouses, pipe bonding materials, can also be used as a vibration feed Machine, vibration conveyor, vibration funnel, vibration source of vibrating chutes, etc. The warehouse vibrator is also known as the anti-clutch device, and the warehouse wall vibration is widely used in mining, metallurgy, chemical, building materials, machinery and other industries.
The vibrator of different vibration power should be selected according to the shape and material characteristics of the silo. If the conical material is large, the vibration force is large, and the pyramid warehouse can be appropriately sealed, and if the single effect is not good, it is optional, or directly The warehouse vibrator is also known as the wall vibrator and the silo inner activator to improve the use effect.
The mounting position is generally located at the silo cone height 1/4 or less than 1/4. If you have two or more, you can install different heights of the symmetry, for wooden or concrete silos, the vibrating plate can be applied to the wall wall to transfer the vibration, activating material.
Anti-closure device
is the energy saving through the vibrating motor as the excitation source, which is high frequency vibration and impact force, effectively eliminating due to internal friction, ankle, Phenomenon such as electricity, component segregation, etc., so that the material is smoothly discharged from the warehouse to ensure the equipment necessary to stabilize the feed. The ZFB series of anti-clutch devices are widely used in metallurgical, chemical, building materials, thermal power, coal, food, cement, pharmaceutical, fertilizer, food, casting, ceramics, abrasive and other industries.
The performance parameters of the wall vibrator are shown in the table:
| Project / Model | CZ10 | CZ50 | CZ100 | CZ250 | CZ400 | CZ600 | CZ800 CZ1000 | ||||||||
| 50 | 100 | 250 | 400 | < Td width = "0" height = "25"> 600800 | |||||||||||
| Effective power (W) | 20 | 30 | 55 | 60 | 120 | 150 | 200 | ||||||||
| Operating voltage (V) | 220 | 220 | 220 | 220 | 220 | 220 | 220 | ||||||||
| Power Cycles (Hz) | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||||
| Represents power supply (a) | ≤0.3 | ≤0.5 | ≤0.9 | ≤1.2 | ≤2.0 | ≤2.3 | < Td width = "0" height = "25"> ≤3.8vibration frequency (times / min) | < Td width = "0" height = "25"> 30003000 | 3000 < / TD> | 3000 | 3000 | 3000 | 3000 | ||
| vibration Body 掁 (mm) | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 2.5 | ||||||||
| Control mode | half-wave rectification | half-wave rectification | Half wave rectification | half-wave rectification | Half-wave rectification | half-wave rectification | half-wave rectification | ||||||||
| Machine weight (kg) | 2.6 | 10 | 15 | 35 | 62.5 | 70 | 119 | ||||||||
| Suitable for mounting silos wall thickness (mm) | 0.6-0.8 < / TD> | 1.2-1.6 | 2.5-3.2 | 4-8 | 6-10 | 6-12 < / TD> | 6-14 |
operating status
When the anti-clutch device is working, Since the high-speed rotation of the vibrating motor produces a periodic high frequency vibration of the silo wall, the wall vibrator is detached from the wall wall due to the periodic vibration of this high frequency, eliminating the friction of the material and the wall wall. On the other hand, the material is influenced by the alternation speed and acceleration, thereby effectively overcomes the internal friction and aggregation force of the material to eliminate the relative stability of the material between the material of the material, so that the material from the material The mouth is smooth.