Home Technique CPU drop

CPU drop



Objective

is to cut a microprocessor to the number below the factory, and its purpose is to save power and reduce heat generation. Suitable for use in a high temperature or less heat dissipation device.

Effects

Modern CPU and graphics card have become "electricity big users" in the computer, users and manufacturers have to consider how to save energy, and reduce operational frequency is a very effective method.

CPU drop

For electronic components comparable to the core process, the power consumption is proportional to: the number of time pulse speed X transistors X-voltage

and the reduction are overclocked, it improves the hour speed.

Since it is no longer stable, the following accessories may affect the stability

first, motherboard, check the pressure relief port on the motherboard (generally cross) , K-shaped, y-shaped) There is a case where protrusions or leaks. If there is, it is necessary to go to the maintenance point to replace the capacitor. Generally, it will get

second, power supply, and motherboards, power supply, and the motherboard in 30 yuan. It may also be aging, replace a power test

third, fan, touch the heat sink with your hand, see if the temperature is scary, if your hands can't close the heat, see if the fan Failure, or too much dust

fourth, CPU, also encountered some CPU bad half-dead, you can light, but a lot of inexplicable problems can only test

with the replacement method
This article is from the network, does not represent the position of this station. Please indicate the origin of reprint
TOP