Home Technique
Regulation mechanism
Regulation mechanism

What is an adjustment mechanism? It is a strain and adjustment process based on an interest mechanism. This kind of adjustment has both macro adjustment and micro adjustment; both overall adjustment...

Labor quota
Labor quota

Overview of quotas It refers to the amount of labor required to produce a certain amount of qualified products or complete a certain amount of work for workers under certain production technology and...

Video processor
Video processor

Introduction In general, the LED video processor is a dedicated video processor for LEDs. And the task it needs to complete, in simple terms, is to convert the image signal from the outside (such as...

Redundant coding
Redundant coding

Announcement time In 2008, it was approved and released by the National Scientific and Technical Terms Review Committee. Source "Terms of Information Science and Technology on Both Sides of the Tai...

External data transfer rate
External data transfer rate

Basic concepts The English spelling of hard disk data transfer rate is Data Transfer Rate, or DTR for short. The data transfer rate of the hard disk expresses the data transfer speed when the hard d...

Optical Ethernet Switch
Optical Ethernet Switch

Introduction Users can choose all-optical port configuration or optical-electrical port hybrid configuration, and access to optical fiber media can be single-mode fiber or multi-mode fiber. The swi...

USB1.1
USB1.1

Introduction The popularity and demand of USB external devices. In September 1998, USBIF proposed the USB1.1 specification to amend USB1.0, mainly amending small technical details, with a bandwidth o...

Manchester code
Manchester code

Introduction Manchester encoding is a bi-phase encoding. It also expresses "0" or "1" by switching between high and low levels, and the level conversion between each bit represents the data code and...

Memory controller
Memory controller

Classification With the development of computer technology, memory controllers are divided into two types: traditional and integrated. TraditionalIn traditional computer systems, the memory control...

Control signal
Control signal

Concept In the control bus, the signal is used as a medium to control the computer signal. For the CPU, the control signal has both output and input. Common control signals ClockUsed to synchroniz...

XDR memory
XDR memory

The Yellowstone Project Rambus is a small company located in Los Latus, California. This company that mainly focuses on intellectual property rights is not large because it does not have its own The...

Interrupt number
Interrupt number

Interrupt concept Interrupt refers to the CPU temporarily interrupting the running program due to external/internal random events or events pre-arranged by the program when the CPU is running the pr...

Program status word register
Program status word register

Composition of the original The PSW of 51 single-chip microcomputer is an 8-bit register, which is used to store some status after the instruction is executed. It is usually filled in by the CPU, bu...

I
I

The I/O instructions in the X86 instruction system are IN/OUT instructions. The function of the IN instruction is to input (read) data from the I/O port to the accumulator of the microprocessor, and t...

Target value
Target value

Type The target value can be roughly divided into two types:1. Quantitative target value. The target value that can be represented by numbers is called the quantitative target value, such as the prod...

TOP